|

|
Name
|

|
14T Clutch Bell Nitro C105151
|

|
|
|
Brief Description
|

|
14T Clutch Bell. C105151
|

|
|
|
SKU/Part Number
|

|
Bell-14T
|

|
|
|
Manufacturer
|

|
Carson
|

|
|
|
Price
|

|
£6.50
|
|

|

|
|
|
|
|
|
|

|
|

|
Name
|

|
15T Clutch Bell Nitro C105152
|

|
|
|
Brief Description
|

|
15T Clutch Bell Nitro C105152
|

|
|
|
SKU/Part Number
|

|
Bell-15T
|

|
|
|
Manufacturer
|

|
Carson
|

|
|
|
Price
|

|
£6.50
|
|

|

|
|
|
|
|
|
|

|
|

|
Name
|

|
16T Clutch Bell Nitro C105153
|

|
|
|
Brief Description
|

|
16T Clutch Bell Nitro C105153
|

|
|
|
SKU/Part Number
|

|
Bell-16T
|

|
|
|
Manufacturer
|

|
Carson
|

|
|
|
Price
|

|
£6.50
|
|

|

|
|
|
|
|
|
|

|
|

|
Name
|

|
Crankshaft pilot Adapter Set Cv-10 C105146
|

|
|
|
Brief Description
|

|
Crankshaft Adapter Set Cv-10 for SO Crankshafts C105146
|

|
|
|
SKU/Part Number
|

|
CA-Adapter-CV-10 C105146
|

|
|
|
Manufacturer
|

|
Carson
|

|
|
|
Price
|

|
£7.50
|
|

|

|
|
|
|
|
|
|

|
|

|
Name
|

|
Flywheel for 2 shoe clutch CV-10 C105142
|

|
|
|
Brief Description
|

|
FfLYWHEEL FOR 2 SHOE CLUTCH
|

|
|
|
SKU/Part Number
|

|
FL-2SHOE-CV-10 C105142
|

|
|
|
Manufacturer
|

|
Carson
|

|
|
|
Price
|

|
£8.50
|
|

|

|
|
|
|
|
|
|

|
|

|
Name
|

|
VX-18 Pullstart Engine VX Series
|

|
|
|
Brief Description
|

|
CEN Racing VX-18 .18 cu in (2.99cc) Pull Start Engine for 1/10 scale on and off-road applications.
|

|
|
|
SKU/Part Number
|

|
CENG70362 1 in stock
|

|
|
|
Manufacturer
|

|
CEN
|

|
|
|
Price
|

|
£120.00
|
|

|

|
|
|
|
|
|
|

|
|

|
Name
|

|
CEN Corsa 5.0cc (.30) Pullstart Engine - GSR5.0
|

|
|
|
Brief Description
|

|
This state-of-the-art 5.0cc (.30) Nitro Powered Engine screams into the racing scene at an affordable price. CORSA Engines’ easy to tune two needle carb. system makes it simple to find the ideal settings for your needs. O-rings throughout provide a tight seal to keep dirt and debris out of your motor while preventing air leaks for maximum consistency.
|

|
|
|
SKU/Part Number
|

|
CENG70369 1 in stock
|

|
|
|
Manufacturer
|

|
CEN
|

|
|
|
Price
|

|
£200.00
|
|

|

|
|
|
|
|
|
|

|
|

|
Name
|

|
CEN Corsa 28 Pullstart Engine - Arena
|

|
|
|
Brief Description
|

|
State-of-the-art technology and design matched with precision components make the .28 one of the most desirable nitro motors for the serious competitive racer who doesn’t want to spend an arm and a leg. This SG shaft, rear exhaust .28 engine is a top-notch choice for buggy, truggy and standard monster truck bashers
|

|
|
|
SKU/Part Number
|

|
CENG70373 3 in stock
|

|
|
|
Manufacturer
|

|
CEN
|

|
|
|
Price
|

|
£140.00
|
|

|

|
|
|
|
|
|
|

|
|

|
Name
|

|
CEN Corsa 46 Pullstart Engine GST7.7
|

|
|
|
Brief Description
|

|
This state-of-the-art 7.4cc (.46) Nitro Powered Engine screams into the racing scene at an affordable price. CORSA Engines’ easy to tune two needle carb. system makes it simple to find the ideal settings for your needs. O-rings throughout provide a tight seal to keep dirt and debris out of your motor while preventing air leaks for maximum consistency.
|

|
|
|
SKU/Part Number
|

|
CENG70376 1 in stock
|

|
|
|
Manufacturer
|

|
CEN
|

|
|
|
Price
|

|
£210.00
|
|

|

|
|
|
|
|
|
|

|
|

|
Name
|

|
Fly wheel nut CT4S/CT5/CTR5.0
|

|
|
|
Brief Description
|

|
MG095 Flywheel And crank shaft adapter.
|

|
|
|
SKU/Part Number
|

|
Z-CENCT030
|

|
|
|
Manufacturer
|

|
CEN
|

|
|
|
Price
|

|
£2.99
|
|

|

|
|
|
|
|
|
|

|
|

|
Name
|

|
CEN Aluminium Flywheel 2 shoe clutch type
|

|
|
|
Brief Description
|

|
Alum.Flywheel (CT-4S) (Upgrade for CT027)
|

|
|
|
SKU/Part Number
|

|
Z-CENCTS01
|

|
|
|
Manufacturer
|

|
CEN
|

|
|
|
Price
|

|
£7.50
|
|

|

|
|
|
|
|
|
|

|
|

|
Name
|

|
Fly Wheel 2 shoe clutch type
|

|
|
|
Brief Description
|

|
MG095 Flywheel And crank shaft adapter.
|

|
|
|
SKU/Part Number
|

|
Z-CENMG095
|

|
|
|
Manufacturer
|

|
CEN
|

|
|
|
Price
|

|
£12.99
|
|

|

|
|
|
|
|
|
|

|
|

|
Name
|

|
DHK .15 - Recoil Assembly for DHK Tiger
|

|
|
|
Brief Description
|

|
DHK .15 - Recoil Assembly for use on the DHK 15 size Tiger Engine
|

|
|
|
SKU/Part Number
|

|
X-DHK15-031
|

|
|
|
Manufacturer
|

|
DHK
|

|
|
|
Price
|

|
£27.99
|
|

|

|
|
|
|
|
|
|

|
|

|
Name
|

|
DHK .21 - Recoil Assembly for DHKH119 Engine
|

|
|
|
Brief Description
|

|
DHK .21 - Recoil Assembly for use on the DHKH119 Engine on the DHK Optimus and Maximus
|

|
|
|
SKU/Part Number
|

|
X-DHK21-0330
|

|
|
|
Manufacturer
|

|
DHK
|

|
|
|
Price
|

|
£27.99
|
|

|

|
|
|
|
|
|
|

|
|

|
Name
|

|
DHK 21 One way Bearing set
|

|
|
|
Brief Description
|

|
DHK .21 - One Way Bearing Set will fit other Brands
|

|
|
|
SKU/Part Number
|

|
X-DHK21-0350
|

|
|
|
Manufacturer
|

|
DHK
|

|
|
|
Price
|

|
£11.99
|
|

|

|
|
|
|
|
|
|

|
|

|
Name
|

|
DHK Optimus GP - Flywheel Nut
|

|
|
|
Brief Description
|

|
DHK Optimus GP - Flywheel Nut
|

|
|
|
SKU/Part Number
|

|
Z-DHK9381-9E3
|

|
|
|
Manufacturer
|

|
DHK
|

|
|
|
Price
|

|
£1.50
|
|

|

|
|
|
|
|
|
|

|
|

|
Name
|

|
DHK Optimus/Maximus GP - Clutch Shoe & Spring Assembly
|

|
|
|
Brief Description
|

|
DHK Optimus/Maximus GP - Clutch Shoe & Spring Assembly
|

|
|
|
SKU/Part Number
|

|
Z-DHK9381-9E4A
|

|
|
|
Manufacturer
|

|
DHK
|

|
|
|
Price
|

|
£19.00
|
|

|

|
|
|
|
|
|
|

|
|

|
Name
|

|
Glowstarter 1.2V 2500mA with Charger
|

|
|
|
Brief Description
|

|
2500 mAh capacity NiMH Includes UK 3-pin 240V charger Length - 35mm
|

|
|
|
SKU/Part Number
|

|
5508216
|

|
|
|
Manufacturer
|

|
J.P.
|

|
|
|
Price
|

|
£18.99
|
|

|

|
|
|
|
|
|
|

|
|

|
Name
|

|
Ming Yang Fuel Filler Valve (Glow/Petrol)
|

|
|
|
Brief Description
|

|
The perfect finishing touch to any model. Installed in the fuel line between the tank and carburettor, it shuts off the fuel supply to the engine to prevent flooding when filling the tank. Ideal for cowled engines, helicopter engines & more. Suitable for both glow and petrol fuel.
|

|
|
|
SKU/Part Number
|

|
L-MG714
|

|
|
|
Manufacturer
|

|
Ming Yang
|

|
|
|
Price
|

|
£8.50
|
|

|

|
|
|
|
|
|
|

|
|

|
Name
|

|
OS Engine MAX 12TG-PX w/12D Carb.
|

|
|
|
Brief Description
|

|
The same basic engine as the 12TG-X but with the alternative format 'P' type crankshaft that suits the 2-speed transmissions found on many of the popular sports cars available today. With the pull-start system fitted as standards, it's a simple engine to start, simple engine to set up and packed with OS quality too. What more can you ask for?
Specification Weight:250g (8.80oz) Displacement: 2.10cc (0.12cu.in.) Bore:13.80mm (0.543in.) Stroke:14.00mm (0.551in.) Power Output: 0.7PS@28000RPM Practical RPM: 5000~30000RPM
|

|
|
|
SKU/Part Number
|

|
L-OS11381 2 in stock
|

|
|
|
Manufacturer
|

|
O.S.
|

|
|
|
Price
|

|
£159.00
|
|

|

|
|
|
|
|
|
|

|
|

|
Name
|

|
O.S. Max 46AXII With E3071 Silencer aircraft engine
|

|
|
|
Brief Description
|

|
Designed to succeed the original 46AX, the new 46AX MkII retains the same mounting dimensions, but O.S. have updated the styling to bring it into line with the current range of AX engines. That means the introduction of the highly efficient and unique cooling fins to keep temperatures under control while the precision carburettor, with its angled needle valve keeping fingers safely away from the propeller disc, offers the linear response across the entire rpm range that you would expect from O.S. Optimised to produce its power at low rpms - and thanks to the highly effective ‘Powerbox’ silencer - the engine produces even less noise too.
Perfect for sports, aerobatic and scale applications.
Specification Weight:489g (17.2oz) Displacement:7.5cc (0.455cu.in.) Bore:22.0mm (0.866") Stroke:19.6mm (0.772") Power Output:1.63hp @ 16,000 rpm Practical RPM:2 - 17,000
|

|
|
|
SKU/Part Number
|

|
L-OS15490
|

|
|
|
Manufacturer
|

|
O.S.
|

|
|
|
Price
|

|
£149.00
|
|

|

|
|
|
|
|
|
|

|
|

|
Name
|

|
O.S. Glow Plug No.8 Medium Hot
|

|
|
|
Brief Description
|

|
O.S. 8 GLOW PLUG HOT MEDIUM HIGH PERFORMANCE PLUG
|

|
|
|
SKU/Part Number
|

|
L-OS71608001
|

|
|
|
Manufacturer
|

|
O.S.
|

|
|
|
Price
|

|
£10.99
|
|

|

|
|
|
|
|
|
|

|
|

|
Name
|

|
Irvine lock glowclip w/Banana plugs
|

|
|
|
Brief Description
|

|
Irvine Lock.Glowclip w/Banana Plugs
|

|
|
|
SKU/Part Number
|

|
L-IRVLS1
|

|
|
|
Manufacturer
|

|
Ripmax
|

|
|
|
Price
|

|
£6.00
|
|

|

|
|
|
|
|
|
|

|
|

|
Name
|

|
Cylinder sleeve and Piston For R18 Engine
|

|
|
|
Brief Description
|

|
Cylinder sleeve and Piston For SCH R18 Engine
|

|
|
|
SKU/Part Number
|

|
G69105
|

|
|
|
Manufacturer
|

|
Schumacher Racing
|

|
|
|
Price
|

|
£49.99
|
|

|

|
|
|
|
|
|
|

|
|

|
Name
|

|
Thunder Tiger PRO 18BX Pull start
|

|
|
|
Brief Description
|

|
Thunder Tiger PRO Replacement part for the Thunder Tiger Pro 18BX Pull Start
|

|
|
|
SKU/Part Number
|

|
PN0246
|

|
|
|
Manufacturer
|

|
Thunder Tiger
|

|
|
|
Price
|

|
£21.99
|
|

|

|
|
|
|
|
|
|

|
|

|
Name
|

|
XTM .247 4.02cc pull start start Engine (SG Shaft)
|

|
|
|
Brief Description
|

|
An ideal engine for most 1:8 buggies and truggys .247 cubic inch (4.02cc) capacity for even more power!
XTM 247 Engine Features:
Twin ballrace supported SG crankshaft. Ringless Piston & Liner Slide Carburettor with twin Needles. Anodised heatsink head. Supplied unboxed, but brand new. ready to drop into most 1:8 vehicles! Specification Top RPM:28000 Weight:410g (14.5oz) Displacement: 4.02cc Bore:17.5mm Stroke:16.75mm Power Output: 2.6HP
|

|
|
|
SKU/Part Number
|

|
L-XTM247X2
|

|
|
|
Manufacturer
|

|
XTM
|

|
|
|
Price
|

|
£130.00
|
|

|

|
|
|
|
|
|
|