Udi Navigator U31R 5.8Ghz Racing Drone RTF Supplied with screen and Goggles
A-U31R 1 left in Stock
UDI's popular Navigator has been upgraded and modified specifically for FPV racing. Thanks to outstanding stability and manoeuvrability, the Navigator provides the perfect platform for FPV novices. A 5.8GHz video telemetry system has been added to stream high quality footage directly to the latest UVR-3 HD goggles. If you find the goggles disorientating at first then simply slide the screen out and clip it to the transmitter while you practice. If you have wanted to give FPV racing a go then the U31R is the perfect introduction with all you need on one box and minimal setup to get you in the air and racing!
2.4GHz Radio Controller The stylish controller allows for far more control range than the WiFi connection and the control sticks give more intuitive and precise control for pilots wanting to get the most from the Navigator's flying capabilities.
5.8GHz FPV Screen & UVR3 U'Fusion FPV Goggles Using 5.8GHz technology the UVR-3 is compatible with numerous drones on the market and with 48 frequencies available you can ensure a strong an reliable signal with other pilots in close proximity. The 5" HD monitor can be removed from the goggle housing and used separately as a stand alone, real time screen. Then in seconds you are able to slide it back into the housing and re-enter reality helmet for an impressive 120° first person view. The screen has numerous adjustable parameters such as brightness, contrast, saturation and language options.
HD Camera The Navigator is fitted with a 720p HD camera with a 120° capture angle for high quality footage 1280 x 720px footage. Capable of video or still photos the camera is activated using the APP and then the footage is stored directly onto an onboard MicroSD card (not included) or streamed via live FPV.
Altitude Hold Mode The Navigator comes equipped with an 'Altitude Hold' feature for easy and precise flying. The built-in sensors hold the drone at the height you are flying at to give you an even more stable quadcopter. If you move the throttle stick forward the Navigator increases it's height but when you centre the throttle the drone 'locks-in' at its current height until you tell it what to do! This make it easier for beginners and also makes for smoother video at a constant height.
Heading Hold Mode If heading hold mode is selected at the beginning of a flight it can be a great aid to those learn to fly drones. When a drone faces a different direction the control directions normally change with it, this can make it tricky if you don't have much experience flying like this. Using Heading Hold mode you needn't worry as the Navigator keeps the controls the same whatever the direction of the drone.
Low Battery Alarm The built in telemetry can alert you then your drone battery is running low on power. The controller will sound beeps as an alarm to and remind you to fly the drone back and land.
One Button Take off/Landing As you get to grips with flying a drone often the takeoff and landing is the most tricky part. But using the 'One button' takeoff/landing feature this can be done automatically for you. Press once and the drone takes off and holds at a certain altitude, press again and the drone slowly descends until it has landed and then stops the motors.
Easy Change Battery The lithium battery is supplied in a moulded case specifically designed to fit the Navigator and slot in place in seconds. A single press release disconnects the battery allowing you to change it quickly.
USB Charger A USB charger is supplied for easy recharging. Simply plug into a standard USB port (such as a phone charger, power pack or computer) and connect the drone battery to the other end. A LED light will indicate when you are ready to fly again.
• Real-time FPV transmission to FPV Goggles • Removable blade guards • HD camera for aerial photography • Heading hold mode • Altitude hold mode • Low battery alarm
Supplied in the Box: • 1 × U31R Quadcopter • 1 × U31R Drone Battery • 1 × USB Drone Battery Charger • 1 × UVR-3 Goggles/Screen • 1 × USB UVR-3 Battery Charger • 1 × Propeller Blades Set (2x Counter Clockwise, 2x Clockwise) • 1 × Instruction Manual • 3 x Tools (Allen Key, Prop Remover, Screwdriver)
Note: 4x 'AA' batteries are required for the controller.
Specification Camera:FOV 120° f/2.0 HD1280x720px (Inc.) Charge Time:75 mins (Approx) Range:50m (Outdoors and Unobstructed) Temperature Range:0° to 40°C (32° to 104°F) Watt Hours:2.59Wh Flight Time:7 Minutes (Approx) FPV System:5.8GHz (Inc.) Weight:88.5g Radio System:2.4GHz (Inc.) Dimensions:183 x 198 x 43mm Charger:USB (Inc.) Electric Motor:4x 8520 Brushed (Inc.) LiPo:2S (2x 1S) 350mAh (Inc.)